The Good Car Co
DIY Ceramic coating kit
DIY Ceramic Coating Kit — Complete Paint Protection System
DIY Ceramic Coating Kit – Professional Protection, Made Simple
Give your car the protection it deserves. The Good Car Co DIY Ceramic Coating Kit brings professional-inspired paint protection to your driveway, helping everyday Aussies keep the cars they love looking better for longer.
Designed for car enthusiasts and everyday drivers alike, our kit makes it easier to achieve a glossy finish, enhanced water beading and a smoother-feeling paint surface, all from home.
What's to love:
-
Long-lasting protection – Help protect your paintwork against everyday environmental contaminants.
-
Deep gloss finish – Enhance your car's appearance with a rich, reflective shine.
-
Hydrophobic performance – Help water bead and roll off the surface, making routine washing easier.
-
DIY-friendly application – Get hands-on with your car without needing a professional detailing setup.
-
Made for people who love their cars – From your daily driver to the Commodore you've owned for 20 years, every car deserves a little care.
No expensive detailing appointment required. Just the satisfaction of protecting your pride and joy yourself.
The Good Car Co. — Built for people who love their cars.
- Know exactly what to do. Every stage explained in order, in the box and on video.
- Everything in one place. Compatible products, so you're not piecing together a kit yourself.
- Help if you get stuck. Message us with a photo and we'll talk you through it.
Launching soon. Join the early-access list and we'll email you the moment ordering opens.
- Shipping within Australia
- Covered by Australian Consumer Law
- Real support from real people
In the box
What's included
Everything you need to go from a washed car to a protected finish, chosen to work together.
You'll also need a hose, two buckets and a wash mitt. No machine polisher or pressure washer is needed to apply the coating, though some cars benefit from polishing first.
Final kit contents are confirmed at launch.
- Ceramic paint protection coating
- Paint preparation (panel wipe) spray
- Pre-coating wash
- Foam applicator block
- Suede application cloths
- Paint-safe microfibre towels
- Nitrile gloves
- Printed instructions and quick-start card
- Access to the online video course
Who it's for
A good fit if you…
- Wash your own car and enjoy doing it properly
- Like the idea of a ceramic coating but would rather do it yourself than pay for professional application
- Have paint with an intact clear coat (new, or older and well kept)
- Can set aside a few hours somewhere shaded and sheltered
Be honest with yourself
Look elsewhere if you…
- Need scratches, swirls or faded paint fixed (that's paint correction)
- Want protection from stone chips (look at paint protection film)
- Have matte paint, a vinyl wrap or PPF
- Can only work in full sun with no shelter
The process
How the kit works
Four stages, each explained in the printed guide and the video course.
- Step
Wash
A thorough wash to remove dirt and grime.
- Step
Prepare
Remove contamination and old wax, then panel wipe.
- Step
Coat
Apply in small sections and level off as directed.
- Step
Cure & maintain
Keep it dry while it cures, then wash gently.
Before you start
Preparation and conditions
Good paint protection starts with good preparation. The coating bonds to what's underneath, so the paint needs to be clean, decontaminated and free of old wax or sealant.
A coating also locks in the paint's current condition. If there are swirls you'd like gone, polish first (by machine, or have it done) before you coat.
You'll need shade, shelter from wind and rain, and a dry spell for curing. The temperature and humidity range is printed on the directions in the kit.
Looking after it
Wash regularly with a pH-neutral shampoo and the two-bucket method, dry with clean microfibre, and avoid automatic brush car washes. Full aftercare guidance comes in the kit.
What a coating won't do
A coating won't remove scratches or stop stone chips, and it isn't a substitute for regular washing. We'd rather you know that before you buy.
Safety information and documents
Full specifications, the Safety Data Sheet and application directions are published here when the kit goes on sale.
Always read the label and directions before use.
Included with every kit
The video course
Five short lessons you can follow on your phone in the garage: getting ready, washing and preparing paint, applying the coating, avoiding common mistakes, and curing and aftercare.
Follow along
Pause at each step and work at your own pace.
Troubleshooting
What high spots look like and what to do about them.
Questions
About the kit
Still unsure? Ask us. We'd rather you ask before buying than be disappointed after.
What is a ceramic coating?
A ceramic coating is a liquid protective layer that you apply to clean, prepared paint. As it cures, it bonds to the clear coat and forms a thin, hard-wearing layer on top.
In everyday terms, it helps the paint stay glossy, makes dirt and grime easier to wash off, and causes water to bead and run off more readily. It's a step up from a traditional wax in how long it tends to last, though how long any coating lasts depends on the product, the preparation and how the car is looked after.
Is this suitable for beginners?
That's exactly who it's for. The kit brings the compatible products together, and the printed instructions and video course walk you through each stage in order.
It still takes patience and care. Preparation is the biggest part of the job, so set aside a few unhurried hours and a spot out of direct sun.
What's included in the kit?
The kit brings together the ceramic coating, compatible preparation products, applicators, suede cloths, microfibre towels, printed instructions and access to the video course.
The full list is on the product page.
Can I use it on an older car?
Generally, yes, as long as the paint has an intact clear coat in reasonable condition. A coating protects the finish you have; it won't restore paint that's faded, peeling or oxidised.
If your clear coat is failing, a coating isn't the right fix. We'll include guidance on how to check your paint before you start.
Do I need a machine polisher?
Not to apply the coating. The kit is being designed around a home setup without one.
A polisher is only needed if you want to correct swirls or light scratches before coating. A coating locks in whatever condition the paint is in, so some owners choose to polish first, or have it done. We'll explain the options in the course.
Do I need a pressure washer?
No. A pressure washer can make washing quicker, but a hose, two buckets and a good wash mitt will do the job.
What preparation is required?
Good paint protection starts with good preparation. In broad terms: a thorough wash, removing bonded contamination, then a panel wipe to strip any old wax, oils or residue so the coating can bond to bare clear coat.
The exact steps are set out in the printed instructions and the video course, matched to the coating in your kit.
Is it suitable for matte paint, vinyl wraps or aftermarket finishes?
Don't assume so. Matte paint, satin finishes, vinyl wraps and paint protection film often need products made specifically for them.
The kit is made for standard gloss automotive paint. If your car has a special finish, check with us before buying.
Delivery
We ship within Australia. Costs and delivery times are shown before you pay.
Your rights
Your rights under the Australian Consumer Law always apply, and we'll make it right if something's wrong.
Support
Questions before or during application? Get in touch and we'll help.